Burners to feature flame regulator.

Cupboard compartment for storage of pots, pans, sheet pans etc.

Double skinned door with pressed internal panel for heat insulation.

Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.

Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.

IPX 4 water protection.

Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.

Oven thermostat adjustable from 140 °C to 300 °C.

Protected pilot light.

Ribbed oven base plate.

The six 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.

Unit to have stainless steel feet with height adjustment up to 50 mm.

Pan supports in cast iron are washable in a dishwasher.

Base compartment consists of an electric standard oven positioned beneath the base plate. Stainless steel oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed enamelled steel base plate.

Control knobs provide smooth, continuous rotation from min to max power level.

Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

One piece pressed 1.5 mm work top in Stainless steel.

All exterior panels in Stainless Steel with Scotch Brite finishing.